PH21-230-800-150SR

启动方式：预热启动

E-mail: Chenxh@Zigykj.com

Phone:(+86)13683140930

WhatsApp: +86 13396691363

Get A Quote

Also Like

Product Description

InputCharacteristic输入特性

Input Voltage 输入电压			230V
Input Voltage Range输入电压范围			198V ~ 264V
Power Line Frequency工作频率			50/60Hz
Maximum Line Current输入最大电流			0.72A@230V
Input Power输入功率			165W@230V
Input Power Factor (PF)输入功率因数			≧0.99@165W
In Rush Current开机冲击电流			40A
Surge Protection突波保护			Yes
Current Protection过流保护			Yes

OutputCharacteristic输出特性

Lamp Types灯管型号			GPH1554T5HO,GHO64T5,TUV64T5HO,GPHO1148T5 GHO36T5,TUV36T5HOGPHO893T5,GPHO846T5 TUVPL-95WHO,TUV75WHO,TL100W
Number of Lamps灯管数量			1
Lamp Current [mA]灯管电流			800(720-880)
Ignition Method启动方式			Preheat Start
Signal feedback信号反馈			5VDC/10mA/Switching quantity--(UV lamps work--5VDC/Purple and yellow pass，UV lamps off---0VDC/Gray and yellow pass )
Open Circuit Protection开路保护			Yes
Type CC			Yes
RFI/EMC			EN61347-1,EN61347-2-3

EnvironmentalRequirements环境要求

Max. Case Hot Spot Temperature外壳最大温度(°C）			70
Min. Lamp Starting Temperature最小启动温度(°C）			-10
Min. operating Temperature工作最低温度(°C）			-10
Max. Ambient Temperature最大工作环境温度(°C）			45
Humidity湿度			5%-85%/IP62
Warranty质保寿命			2 Years@Tc,70°Cmax

MechanicalRequirements机械要求

Weight 重量			385g
_Length w/Mount外壳长度			215mm
Diatance between Mounting Holes 安装孔			211mm
_Width外壳宽度			44mm
_Height外壳高度			30mm
_Input(mm) 引线			WIRE UL1015 20AWG 多芯黑/白色 105℃ 600VAC 1*430mm
_Output(mm) 输出引线			WIRE UL1015 20AWG 多芯红/黄色 105℃ 600VAC 2*650mm
信号反馈引线			WIRE UL1007 24AWG 多芯红/黑色 80℃ 300VAC 1*650mm
Potting			黑胶

SketchMap示意图

Caution注意事项

The power supply must be cutoff when installing or replacing ballast安装与更换镇流器，必须先切断电源

Ballast housing must be grounded safely镇流器外壳必须安全接大地

"The length of the connecting line between the ballast and the lamp tube shall not exceed 10m, and thecross-sectional area of the line shall not be less than 0.5mm²镇流器与灯管的连接线长不能超过10m,并且线的截面积不能小于0.5mm平方"

上一页： PH2-230-800-150

下一页： PH1-230-800-120R5V

Keyword:

PH21-230-800-150SR

Categories:

PH系列